ACCESSORIES
Basic & Advanced
Clamps
Side clamps
Corner Clamps
Side clamps
The side clamps are made of reinforced polymers and are used to attach the poles to the sides of the tent, putting the canvas under tension. You can mount them using the handy clamp at the bottom that fits both aluminum and wooden poles. Are you setting up your safari-style tent so that there isn't a pole under each clamp? If so, you can use a shorter bolt with the clamp to give it a more taut look.
Corner Clamps
Corner clamps are made of reinforced polymers and are always mounted on the curtain. Just like the side clamps, they serve to put the canvas under tension. The clamps fit both aluminum and wood poles. Aren't you mounting a pole under each clamp? If so, you can give the tent a more taut look by using a cap nut.
Pole caps
Standard Pole cap
XL Pole cap
Standard Pole cap
This pole cap (made from reinforced polymers as the clamps) is mounted on the lower poles of the stretch tent to keep the canvas up, and fits all poles, both aluminum and wood, and both side and center poles. You can use this cap, for example, to lose as little space as possible inside the stretch tent, and to keep corners and/or sides elevated. For center poles, we recommend using an XL hood.
XL Pole cap
This extra-large hood (also made from reinforced polymers as the clamps) is mounted on the center poles keeping the tent elevated and fits both aluminum and wood side and center poles. Because of its large surface area, the pressure on the canvas is better distributed and fewer impressions of the hood will remain on the canvas after use.
Connecting System
Connecting Strip
Connecting Clamp
Connecting Strip
This connecting strip, available in the same colors as the selected stretch tent, is mounted on the connection between two marquees so that no rain can enter once they are linked. For this reason, it is important that the connecting strip is always at the highest point of the connected tents. The connecting strip is one meter wide and can be purchased separately per linear meter.
Connecting Clamp
This clamp is used to attach two stretch tents to each other, forming a larger stretch marquee. A connecting strip is placed over these clamps to make a watertight connection. The connecting clamps can be purchased separately.
Anchoring
Standard Straps
Storm Straps
Pegs
Standard Straps
The straps are made of durable nylon and keep the tent under tension. They pull the tent over the corner and side clamps down, giving the sides of the tent a typical arched shape. They are attached at one end to the side and corner clamps, while firmly attaching the other end to the poles. The straps are included in the set and have a tensile strength of 500 kg.
Storm Straps
Storm straps (twenty meters long) can be used to give a large stretch tent extra protection against the wind. Using the pegs, storm straps are stretched across the length of the tent. This means that the wind can't blow the tent into the air, and as a result, the poles can't fall off. The storm straps are available in black and white and can be purchased separately.
Pegs
There are two types of pegs included with our stretch tents. Thanks to the T-shaped end of the 50 cm pegs, the tension strap stays in the perfect position at all times. The tent set also contains several heavier pegs, which are better able to withstand the tension exerted when several tension straps are attached to a single peg. Both types of pegs are placed in the ground at a 45° angle.
Accessories for Poles
Aluminium pole foot
Adapters for wooden poles
Aluminium pole foot
These rubber feet slide on the bottom of the aluminum poles. On hard surfaces, they prevent the aluminum poles from slipping causing damage to the floor. On soft surfaces, they ensure that the poles do not sink into the ground. These feet are included with the aluminum pole set.
Adapters for wooden poles
The wood pole adapter is screwed onto the top of the center poles of the tent, so that the pole cover caps fit snugly over it. This prevents the wooden poles from coming into direct contact with the tent canvas.
Keder System
Using the Keder rail, a stretch marquee can be attached to a wall without any problems. Our stretch tents are equipped with a very strong Keder seam, which fits perfectly into the groove of a Keder rail and forms an uninterrupted connection between the curtain and the wall. The keder rail can be purchased separately and is available by the linear meter.
